Shandong Conviction Energy Saving and Environmental Protection Technology Co., Ltd.
Electrochemical automatic water treatment equipment
You are here: front page » product » Electrochemical automatic water treatment equipment

loading

Share to:
sharethis sharing button

Electrochemical automatic water treatment equipment

Adopting modular design, each module is controlled separately, the working parameters can be set independently, the safety redundant factor is large, and the reliability of the work is high. According to the characteristics of the water quality of cycle water, a variety of forms of working mode can be set to meet the actual needs of the scene Essence
Availability:
Quantity:

SX-EDE electrochemical automatic water treatment equipment technical parameters

Work pressure: Generally<0.6MPa

Operating temperature: Normal temperature ~80

Water resistance: Less than1.5Rice pillar

Applicable water quality: There are fewer suspendeds and colloids, and clean circulating water that does not need to be filtered (turbidity is less than3Degree, the maximum geometric size of solid substances such as particles, slices, rods does not exceed1mm

Be applicablescopeIndustrial and commercial cooling systems; medium water reuse circulating water system; heating boiler equipment; secondary water supply purification equipment for living water; bath centers, swimming pools; industrial wastewater treatment

       Equipment; Heavy metal restoration system for industrial waste acid and alkali; pre -processing of sewage treatment system.

Circulating water sewage volume: Smaller than adding medicine to dirt and sewage discharge20--70%, No chemical pollution of sewage waters


Algae: Keep the water quality normally, without the obvious growth of algae

Downside95%

Working power supply220V/50HZ/AC

Downside cycle24240Hour

EliminateWay:automatic

1Installation method

The equipment is easy to install. Generally, the circulating water pipe is installed on the water side near the circulating pool. The thickness of the basic ground hardening layer is not less than 100mm. It is equipped with a simple color steel shed. The factory provides 380V power power.

2, Product acceptance standard

This water treatment equipment is continuously put into operationAfter 30 days, stop chemical adding medicine and run full 2The operating parameters that need to block the dirt in the month are better or less than that of the indicators that are not lower than the original system. Open the device that needs dirt to observe the scale, better than the original system adopts chemical plus drug resistance.

3SX-EDESpecifications for electrochemical automatic water treatment equipment

name

model

powerKW

flowm3  /H

Electrochemical automatic water treatment equipment

SX-EDE-D-30

5

30

Electrochemical automatic water treatment equipment

SX-EDE-D-50

10

50

Electrochemical automatic water treatment equipment

SX-EDE-D-200

24

200

 


Previous: 
Next: 

Product Categories

E-mail Subscriptions

Shandong Shenxin Energy Saving and Environmental Protection Technology Co., Ltd. was established in July 2014 with a registered capital of 10 million yuan. The company is a company that is full of vigor and vitality, strong corporate culture compatibility, and rapid absorption and integration of advanced concepts.

about us

Shandong Shenxin Energy Saving and Environmental Protection Technology Co., Ltd. was established in July 2014 with a registered capital of 10 million yuan. The company is a company that is full of vigor and vitality, strong corporate 

Products center

Quick Links

contact us

address:Dingzhuang, Jiehe Town, Tengzhou City, Zaozhuang City, Shandong Province, Shandong Province, China
mailbox: xuxing5957@sina.com
phone:86-0632-2723258
Mobile phone:13563223857
 
节 2018 Shandong is convinced of energy conservation and environmental protection technology Co., Ltd.Lu ICP No. 14021212 -1